China Komatsu Excavator Bulldozer PC200 Undercarriage Parts Sprocket Gear worm and wheel gear

Item Description

Sprocket Rim
Material: 40Mn
Technology: Forging or Casting
Complete: Smooth
Hardness: HRC50-60
Deepth: 4mm-10mm
Warmth treatment: Quenching
Proportions: Intercontinental Normal
Port: HangZhou
Offer Capacity: one hundred thousand Piece/Items per Month can enhance
Packaging Detail: Wooden case/pallet
Supply Depth: ten-20 times right after the payment
Certificate: ISO9002
Warranty time: 6 months
Services: OEM and right after-sale provider

Our producer can provide the Model under:
Komatsu:
PC40-7 PC60-5-6-7 PC75 PC100-3-5 PC120-5 PC130 PC200-2-3-4-5-6-7-8 PC220-1-3-5 PC230 PC240 PC300-1-5-6-7 PC400-1-3-five

Hitachi:
EX40 EX55 ZX55 EX55-5B EX60-2-3 EX70(ZX70) EX100M EX100-1-2-3-5 EX120 EX150 EX160 EX200-1-2-3-5 ZX200 ZX210 EX220 ZX230 EX300-1-2-3-5 EX330 EX400 UH08 UH07 UH10 UH14

Sumitomo:
SH60 SH65 SH100 SH120-A3 SH120 SH200 SH220-1-5 SH260 SH280 SH300-1-2-3 SH340 SH580-5 S25 S35 S120 S160 S250 S260 S265F2 S280 S280F2 S280FA

Kobelco:
SK30 SK40 SK60 SK100 SK120 SK200-1-6 SK220-1-3 SK230-3-6 SK300 SK320 SK07-1-2-7 SK07N2 SK09

Caterpillar:
E70 E110 E120B E180 E200B E240 E300B E307 CAT311 CAT312 E320 E325 E330 E450 MS180

Daewoo:
DH55 DH60 DH70 DH80 DH150 DH150W DH175 DH200 DH210 DH215-7-9 DH220-3-5-7 DH225 DH255 DH258 DH280 DH300 DH320 DH330 DH340 DH370 DH400

Kato:
HD250 HD250SE HD400 HD450 HD500 HD510 HD550 HD550SE HD650 HD700 HD770 HD800 HD1250 HD1430

Hyundai:
R55 R60-5-7-9 R80 R110 R130-1-2-7 R150 R190 R200-1-2 R210 R215 R220 R225-7 R265 R290 R305 R455

Volvo:
EC55B EC60C EC140B EC200B EC210B EC240B EC290B EC360B EC460B EC550

Bulldozer:
D20 D31 D50 D60 D65 D30 D40 D60-3 D6B D5 D80 D85 D3C D4C D4D D75 D80A-7 D4E D4H-1 D31-fifteen D31-18 D50-15 D50-sixteen D6D D5H D8N D9N D155 D31 D355 D10

HangZhou Fortune Equipment Co., Ltd. is 1 of principal producers and exporters of undercarriage parts for excavators and bulldozers for far more than 10 a long time in China. Its manufacturing facility is situated at HangZhou Town of ZheJiang Province, really near HangZhou Port with a very handy transportation.

HangZhou Fortune Equipment mostly provide undercarriage substitute components these kinds of as track rollers, prime rollers, sprockets, segments, idler assy, keep track of hyperlink assy, monitor shoe, bucket, bucket enamel, bucket hyperlink, I hyperlink, cutting aspect, stop bits, bushings pins, bolts and nuts for excavators and bulldozers. Its goods are applicable for most renowned makes this sort of as Komatsu, Hitachi, Caterpillar, Kobelco, Kato, Daewoo, Hyundai, CZPT and so on. Most products are exported to European, Southeast Asia, Middle East, South The us and so on.

With the principal “Good top quality and Best providers at sensible prices”, we attempt to continuously improve our generation technique to offer better products at much better prices. We cordially welcome the buyers from all over the world to check with and pay a visit to, on the basis of mutual reward and creat refulgence jointly.
 

Brand name                
KOMATSU PC30 PC40 PC45 PC60 PC75 PC100 PC120 PC200
EXCAVATOR PC220 PC300 PC350 PC400        
CATERPILLAR E70B E110 E120 E200B E307 E311 E312 E320
EXCAVATOR E322 E325 E300B E330        
KOMATSU D20 D21 D30 D31 D37 D40 D50 D60
BULLDOZER D63 D65 D80 D85 D135 D155 D355 D375
CATERPILLAR D3C D3D D4 D4C D4D D4E D5 D5H
BULLDOZER D6 D6C D6D D6H D7E D7G D8N D9N
HITACHI EX30 EX40 EX60 EX100 EX120 EX200 EX220 EX300
  EX400 ZAX200 ZX330 ZX350 UH07 UH081 UH083  
DAEWOO DH55 DH200 DH220 DH280 DH300 DH320    
HYUNDAI R55 R110 R130 R150 R200 R210 R250 R290
KEBELCO SK60 SK100 SK120 SK200 SK220 SK300 K904 K907
MITSUBISHI MS110 MS120 MS140 MS180        
KATO HD140 HD250 HD400 HD550 HD700 HD850 HD900 HD1220
SAMSUNG H.I. MX8 SE200 SE210 SE280 MX292 SE350    
SUMITOMO SH70 SH100 SH120 SH160 SH200 SH280 SH300 SH340

Contact us:

HangZhou Fortune Machinery Co., Ltd.
Speak to person:James

 

Type: Crawler
Application: Excavator
Certification: CE, ISO9001: 2000
Condition: New
Material: 40mn
Hardness: HRC50–55

###

Customization:

###

BRAND                
KOMATSU PC30 PC40 PC45 PC60 PC75 PC100 PC120 PC200
EXCAVATOR PC220 PC300 PC350 PC400        
CATERPILLAR E70B E110 E120 E200B E307 E311 E312 E320
EXCAVATOR E322 E325 E300B E330        
KOMATSU D20 D21 D30 D31 D37 D40 D50 D60
BULLDOZER D63 D65 D80 D85 D135 D155 D355 D375
CATERPILLAR D3C D3D D4 D4C D4D D4E D5 D5H
BULLDOZER D6 D6C D6D D6H D7E D7G D8N D9N
HITACHI EX30 EX40 EX60 EX100 EX120 EX200 EX220 EX300
  EX400 ZAX200 ZX330 ZX350 UH07 UH081 UH083  
DAEWOO DH55 DH200 DH220 DH280 DH300 DH320    
HYUNDAI R55 R110 R130 R150 R200 R210 R250 R290
KEBELCO SK60 SK100 SK120 SK200 SK220 SK300 K904 K907
MITSUBISHI MS110 MS120 MS140 MS180        
KATO HD140 HD250 HD400 HD550 HD700 HD850 HD900 HD1220
SAMSUNG H.I. MX8 SE200 SE210 SE280 MX292 SE350    
SUMITOMO SH70 SH100 SH120 SH160 SH200 SH280 SH300 SH340
Type: Crawler
Application: Excavator
Certification: CE, ISO9001: 2000
Condition: New
Material: 40mn
Hardness: HRC50–55

###

Customization:

###

BRAND                
KOMATSU PC30 PC40 PC45 PC60 PC75 PC100 PC120 PC200
EXCAVATOR PC220 PC300 PC350 PC400        
CATERPILLAR E70B E110 E120 E200B E307 E311 E312 E320
EXCAVATOR E322 E325 E300B E330        
KOMATSU D20 D21 D30 D31 D37 D40 D50 D60
BULLDOZER D63 D65 D80 D85 D135 D155 D355 D375
CATERPILLAR D3C D3D D4 D4C D4D D4E D5 D5H
BULLDOZER D6 D6C D6D D6H D7E D7G D8N D9N
HITACHI EX30 EX40 EX60 EX100 EX120 EX200 EX220 EX300
  EX400 ZAX200 ZX330 ZX350 UH07 UH081 UH083  
DAEWOO DH55 DH200 DH220 DH280 DH300 DH320    
HYUNDAI R55 R110 R130 R150 R200 R210 R250 R290
KEBELCO SK60 SK100 SK120 SK200 SK220 SK300 K904 K907
MITSUBISHI MS110 MS120 MS140 MS180        
KATO HD140 HD250 HD400 HD550 HD700 HD850 HD900 HD1220
SAMSUNG H.I. MX8 SE200 SE210 SE280 MX292 SE350    
SUMITOMO SH70 SH100 SH120 SH160 SH200 SH280 SH300 SH340

Benefits and Uses of Miter Gears

If you’ve ever looked into the differences between miter gears, you’re probably wondering how to choose between a Straight toothed and Hypoid one. Before you decide, however, make sure you know about backlash and what it means. Backlash is the difference between the addendum and dedendum, and it prevents jamming of the gears, protects the mating gear surfaces, and allows for thermal expansion during operation.
gear

Spiral bevel gears

Spiral bevel gears are designed to increase efficiency and reduce cost. The spiral shape creates a profile in which the teeth are cut with a slight curve along their length, making them an excellent choice for heavy-duty applications. Spiral bevel gears are also hypoid gears, with no offsets. Their smaller size means that they are more compact than other types of right-angle gears, and they are much quieter than other types of gear.
Spiral bevel gears feature helical teeth arranged in a 90-degree angle. The design features a slight curve to the teeth, which reduces backlash while increasing flexibility. Because they have no offsets, they won’t slip during operation. Spiral bevel gears also have less backlash, making them an excellent choice for high-speed applications. They are also carefully spaced to distribute lubricant over a larger area. They are also very accurate and have a locknut design that prevents them from moving out of alignment.
In addition to the geometric design of bevel gears, CZPT can produce 3D models of spiral bevel gears. This software has gained widespread attention from many companies around the world. In fact, CZPT, a major manufacturer of 5-axis milling machines, recently machined a prototype using a spiral bevel gear model. These results prove that spiral bevel gears can be used in a variety of applications, ranging from precision machining to industrial automation.
Spiral bevel gears are also commonly known as hypoid gears. Hypoid gears differ from spiral bevel gears in that their pitch surface is not at the center of the meshing gear. The benefit of this gear design is that it can handle large loads while maintaining its unique features. They also produce less heat than their bevel counterparts, which can affect the efficiency of nearby components.

Straight toothed miter gears

Miter gears are bevel gears that have a pitch angle of 90 degrees. Their gear ratio is 1:1. Miter gears come in straight and spiral tooth varieties and are available in both commercial and high precision grades. They are a versatile tool for any mechanical application. Below are some benefits and uses of miter gears. A simple explanation of the basic principle of this gear type is given. Read on for more details.
When selecting a miter gear, it is important to choose the right material. Hard faced, high carbon steel is appropriate for applications requiring high load, while nylon and injection molding resins are suitable for lower loads. If a particular gear becomes damaged, it’s advisable to replace the entire set, as they are closely linked in shape. The same goes for spiral-cut miter gears. These geared products should be replaced together for proper operation.
Straight bevel gears are the easiest to manufacture. The earliest method was using an indexing head on a planer. Modern manufacturing methods, such as the Revacycle and Coniflex systems, made the process more efficient. CZPT utilizes these newer manufacturing methods and patented them. However, the traditional straight bevel is still the most common and widely used type. It is the simplest to manufacture and is the cheapest type.
SDP/Si is a popular supplier of high-precision gears. The company produces custom miter gears, as well as standard bevel gears. They also offer black oxide and ground bore and tooth surfaces. These gears can be used for many industrial and mechanical applications. They are available in moderate quantities from stock and in partial sizes upon request. There are also different sizes available for specialized applications.
gear

Hypoid bevel gears

The advantages of using Hypoid bevel and helical gears are obvious. Their high speed, low noise, and long life make them ideal for use in motor vehicles. This type of gear is also becoming increasingly popular in the power transmission and motion control industries. Compared to standard bevel and helical gears, they have a higher capacity for torque and can handle high loads with less noise.
Geometrical dimensioning of bevel/hypoid bevel gears is essential to meet ANSI/AGMA/ISO standards. This article examines a few ways to dimension hypoid bevel and helical gears. First, it discusses the limitations of the common datum surface when dimensioning bevel/helical gear pairs. A straight line can’t be parallel to the flanks of both the gear and the pinion, which is necessary to determine “normal backlash.”
Second, hypoid and helical gears have the same angular pitch, which makes the manufacturing process easier. Hypoid bevel gears are usually made of two gears with equal angular pitches. Then, they are assembled to match one another. This reduces noise and vibration, and increases power density. It is recommended to follow the standard and avoid using gears that have mismatched angular pitches.
Third, hypoid and helical gears differ in the shape of the teeth. They are different from standard gears because the teeth are more elongated. They are similar in appearance to spiral bevel gears and worm gears, but differ in geometry. While helical gears are symmetrical, hypoid bevel gears are non-conical. As a result, they can produce higher gear ratios and torque.

Crown bevel gears

The geometrical design of bevel gears is extremely complex. The relative contact position and flank form deviations affect both the paired gear geometry and the tooth bearing. In addition, paired gears are also subject to process-linked deviations that affect the tooth bearing and backlash. These characteristics require the use of narrow tolerance fields to avoid quality issues and production costs. The relative position of a miter gear depends on the operating parameters, such as the load and speed.
When selecting a crown bevel gear for a miter-gear system, it is important to choose one with the right tooth shape. The teeth of a crown-bevel gear can differ greatly in shape. The radial pitch and diametral pitch cone angles are the most common. The tooth cone angle, or “zerol” angle, is the other important parameter. Crown bevel gears have a wide range of tooth pitches, from flat to spiral.
Crown bevel gears for miter gear are made of high-quality materials. In addition to metal, they can be made of plastic or pre-hardened alloys. The latter are preferred as the material is less expensive and more flexible than steel. Furthermore, crown bevel gears for miter gears are extremely durable, and can withstand extreme conditions. They are often used to replace existing gears that are damaged or worn.
When selecting a crown bevel gear for a miter gear, it is important to know how they relate to each other. This is because the crown bevel gears have a 1:1 speed ratio with a pinion. The same is true for miter gears. When comparing crown bevel gears for miter gears, be sure to understand the radii of the pinion and the ring on the pinion.
gear

Shaft angle requirements for miter gears

Miter gears are used to transmit motion between intersecting shafts at a right angle. Their tooth profile is shaped like the mitre hat worn by a Catholic bishop. Their pitch and number of teeth are also identical. Shaft angle requirements vary depending on the type of application. If the application is for power transmission, miter gears are often used in a differential arrangement. If you’re installing miter gears for power transmission, you should know the mounting angle requirements.
Shaft angle requirements for miter gears vary by design. The most common arrangement is perpendicular, but the axes can be angled to almost any angle. Miter gears are also known for their high precision and high strength. Their helix angles are less than ten degrees. Because the shaft angle requirements for miter gears vary, you should know which type of shaft angle you require before ordering.
To determine the right pitch cone angle, first determine the shaft of the gear you’re designing. This angle is called the pitch cone angle. The angle should be at least 90 degrees for the gear and the pinion. The shaft bearings must also be capable of bearing significant forces. Miter gears must be supported by bearings that can withstand significant forces. Shaft angle requirements for miter gears vary from application to application.
For industrial use, miter gears are usually made of plain carbon steel or alloy steel. Some materials are more durable than others and can withstand higher speeds. For commercial use, noise limitations may be important. The gears may be exposed to harsh environments or heavy machine loads. Some types of gears function with teeth missing. But be sure to know the shaft angle requirements for miter gears before you order one.

China Komatsu Excavator Bulldozer PC200 Undercarriage Parts Sprocket Gear     worm and wheel gearChina Komatsu Excavator Bulldozer PC200 Undercarriage Parts Sprocket Gear     worm and wheel gear
editor by czh 2023-01-24